KEY FEATURES
- Compact Design
- Hydraulic brake system for high clamping force
- High speed and accuracy
- Rotary joint as an option
Main features:
1. High precision double lead worm gear adopts Japanese unique formula, high tension, corrosion-resistant and wear-resistant aluminum bronze.
2. Special bearing for turntable is adopted, which can bear heavy cutting in horizontal and vertical directions and has high rigidity. Better than general bearing form.
3. Large bore design can better meet the use needs, and large space is more conducive to fixture and process plannin.
4. After the whole machine is assembled, all the datum surfaces are ground, with high precision and generous appearance.
| TCV-630 Specification | Unit | ||
| Dia.of Rotary table | mm | Φ630 | |
| Dia.of center hole of table | mm | Φ289 | |
| Inner hole dia. of center sleeve | mm | Φ225 | |
| Center through hole dia. | mm | Φ225 | |
| Center height (Vetical) | mm | 400 | |
| Total height of table(Horizontal) | mm | 350 | |
| Width of T-slot of table | mm | 18H7 | |
| Width of location key | mm | 22H7 | |
| Minimum setting unit | deg | 0.001 | |
| Dividing accuracy | sec | 15 | |
| Repeat positioning accuracy | sec | 4 | |
| Clamping system (by hydraulic) | Kg/cm² | 35 | |
| clamping torque | N.m | 7800 | |
| Servo Motor model | FANUC | straight shaft | α22i/β22is |
| Siemens | straight shaft | 1FK7084 | |
| Reduction ratio | – | 1/180 | |
| Max.speed | rpm | 16.6 | |
| Total weight(without motor) | kg | 750 | |
Optional accessories:
1. 3-jaw chuck and flange
2. Tail stock (Disc type or Centre type)
3. Bridge plage and L block
4. CNC controller
5. Motor
6. PLC
Reviews
There are no reviews yet.