1.FANUC 0i –MF CNC system: stable performance, convenient operation programming, perfect and punctual after-sales service.
2.FANUC servo motor for six coordinate axis and main axis: good characteristic and perfect low speed performance.
3.With high-precision ball screw bar and rolling linear guide, the operating components make positioning accurately.
4.Remote control device is adopted in cooling system. Depends on the hole size, materials, chips and required precision, adjusting the flow rate and pressure can optimize the cooling result.
5.Precision detection: The dynamic inspection is done by British Renishaw laser interferometer. It makes compensation dynamically according to the test result, which ensures the positioning of the whole machine and re-positioning accurately.
6.DHD series CNC deep hole drilling machine is mainly used for extremely difficult processes of deep hole in mold industry. It’s spoken highly of its high-efficiency, low-cost, humanized technological process.
| ltems | DHD10-1210 | ||
| Diameter of the Hole for Gun Drill | r3-30mm | ||
| Maximum Depth of the Hole for Gun Drill | 1000 mm | ||
| Processing Ranoa(from Left to Right) of the workingTable | 1200 mm | ||
| Processing Range of sliding Table | 1000 mm | ||
| Processing Range of Column | 500mm | ||
| The Rotary Angla of Ram | The Spindle Turrs upward 15 degrees,and down to 25 degrees | ||
| Taper Hole of Spindle | BT40 | ||
| Maximum Speed of Spindle | 4500 mm | ||
| Spindle Motor | 11kw | ||
| X Axis Servo Motor | 27 N.m | ||
| Y Axis Servo Motor | 27N.m | ||
| Z Axis Servo Motor | 27N.m | ||
| W Axis Servo Motor | 11 N.m | ||
| A Axis Servo Motor | 20 N.m | ||
| B Axis Servo Motor | 20N.m | ||
| Total Power | 45 kw | ||
| Max.Loading Capacity | 5 ton | ||
Reviews
There are no reviews yet.