DHD15-3017 Six Axis CNC Deep Hole Drilling Machine

1.FANUC 0i –MF CNC system: stable performance, convenient operation programming, perfect and punctual after-sales service.

2.FANUC servo motor for six coordinate axis and main axis: good characteristic and perfect low speed performance.

3.With high-precision ball screw bar and rolling linear guide, the operating components make positioning accurately.

4.Remote control device is adopted in cooling system. Depends on the hole size, materials, chips and required precision, adjusting the flow rate and pressure can optimize the cooling result.

5.Precision detection: The dynamic inspection is done by British Renishaw laser interferometer. It makes compensation dynamically according to the test result, which ensures the positioning of the whole machine and re-positioning accurately.

6.DHD series CNC deep hole drilling machine is mainly used for extremely difficult processes of deep hole in mold industry. It’s spoken highly of its high-efficiency, low-cost, humanized technological process.

ltems DHD15-3017
Diameter of the Hole for Gun Drill r3-50mm
Maximum Depth of the Hole for Gun Drill 1500 mm
Processing Ranoa(from Left to Right) of the workingTable 3000 mm
Processing Range of sliding Table 1700 mm
Processing Range of Column 800mm
The Rotary Angla of Ram The Spindle Turrs upward 15 degrees,and down to 25 degrees
Taper Hole of Spindle BT50
Maximum Speed of Spindle 4500 mm
Spindle Motor 15kw
X Axis Servo Motor 36 N.m
Y Axis Servo Motor 36N.m
Z Axis Servo Motor 36N.m
W Axis Servo Motor 27 N.m
A Axis Servo Motor 36 N.m
B Axis Servo Motor 36N.m
Total Power 55 kw
Max.Loading Capacity 20 ton



There are no reviews yet.

Be the first to review “DHD15-3017 Six Axis CNC Deep Hole Drilling Machine”

Your email address will not be published. Required fields are marked *

Scroll to Top